Do I need to flush out my water lines and if so, for how long?

The customer line will be flushed at the front outside spigot by the contractor installing the new smart meter. If it can’t be flushed at the outside spigot it will be noted on a door hanger letting you know. At this point you will need to run your sink faucet several minutes or until the air in the line dissipates.

Show All Answers

1. Why is Waterworks undertaking this effort?
2. Who is doing the work for the project?
3. How long will I be without water during installation?
4. Do I need to flush out my water lines and if so, for how long?
5. Will property be disturbed?
6. Whom do I contact with questions about the field work to my meter?
7. Can a customer choose to not upgrade?
8. Is my account information and meter data secure?
9. How will I know that you have my reading and not someone else’s?
10. Will my water bill go up?
11. Does this mean no more meter readers?
12. Can I cover up the meter after the installation?
13. Has this new smart meter equipment been tested for accuracy and reliability?
14. Will the communication system interfere with home equipment?
15. Do I own the meter?
16. Will meter boxes be locked?
17. Can I purchase and install or remove my own meter?
18. If I notice a problem after installation, whom should I contact?